Masterpro Nivo Slider 3.xMasterpro Nivo Slider 3.xMasterpro Nivo Slider 3.xMasterpro Nivo Slider 3.xMasterpro Nivo Slider 3.x

Custom Google Search 

 

Schematic representation of the antenna:

расчет баночной антенны

INPUT DATA:


Select measurement units


Freq: MHz
D: mm

Calculate

RESULT:


L:
h:
d:
R1:
R2:

Fl>:
Fh>:

 © 2015 -  3G-Aerial
Limitations and features of antenna calculations

рупорная коническая антеннаBy adding an attachment in the form of a horn to the antenna, we get the simplest conical horn antenna from a can antenna. This way allows you to get an increase in amplification of up to 3 dB compared to a single can. The attachment can be made from tin sheet, its template is clear from the figure below, and the required dimensions R1 and R2 are calculated in the calculator. Increasing the size of the horn to achieve even greater gain is not recommended, since the effect of the polarization plane rotation can be occurred in a conical horn antenna. As a result, by increasing the horn, we may even lose in gain. With a large horn, the best result is obtained with a pyramidal horn antenna.tincan2

If a circular waveguide is used as a transmission line, then it should be operating in a single mode TE11(H11). In this case, the appearance of the next mode TM01(E01) should be avoided. However, in order for the can to radiate with its open end, it must be excited just in the TM01(E01) mode. The dimensions of the can are optimally chosen to create such an oscillation mode.

802.11b and 802.11g WiFi networks operate at frequencies from 2412 MHz to 2484 MHz. Therefore, the lower cutoff frequency must be less than 2412 MHz and the upper cutoff frequency must be greater than 2484 MHz.

The calculator, when choosing a working range, automatically suggests the optimal can diameter. When manually entering the frequency, it is necessary to manually select the can diameter so that the working range fits within its bandwidth.

A calculation similar to this calculator is available in the Cantennator android app available on Google play. You can download it to your mobile device by tapping on the QR code or by scanning it. Don't forget to rate the app...cantennator qr code

Optimized antennas calculated in EM simulator:

 
 
Comments  
Hey, thanks for this amazing website. I was looking for a more stable connection for my 4G internet. When I put my router on the rooftop I get a decent RSRP (-75) but my SINR is usually 0 at rooftop. I did buy a pair of LPDA antennas and they did improve sinr a bit. Around 10. I had couple of disconnects here and there and I wanted to eliminate that. I was going to try building a pair of cantennas for a more directional approach as I can see the cell tower from the rooftop and cantenna seems very easy to make. Is that a good idea? I can see band 7, 3, and 1. But 7 and 3 are the strongest here. So was going to make for band 7.

Perhaps you could provide some insight.
Add comment
Comments are pre-moderated. Moderation does not take place in real time, there may be a delay.
The site has comments on social networks, which have much more opportunities for communication.

Advertising on the website 

Masterpro Nivo Slider 3.xMasterpro Nivo Slider 3.x
US $57…145
US $33…100


Download our Cantennator app for antenna calculation from GooglePlay
Scan QR-code, if you are here on desktop, or tap it, if you are here on phone:


Follow the site news on Twitter.
Scan QR-code, if you are here on desktop, or tap it, if you are here on phone:

Who is online